Devialet
The Devialet integration lets you control your Devialet
-
For a stereo setup, only one of the speakers need to be configured.
-
Make sure your Devialet firmware version is 2.16.1 or later. Otherwise, expect functions not to work.
-
Assigning a fixed IP address to your speakers is highly recommended.
Configuration
To add the Devialet device to your KS Assistant instance, use this My button:
Devialet can be auto-discovered by KS Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your KS Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Devialet.
-
Follow the instructions on screen to complete the setup.
Tested models
Known supported devices:
- Phantom I
- Phantom II
Turning off the device
The media player turn off button and the media_player.turn_off action will turn off all the devices of the designated system. Exiting OFF mode is only possible by pressing a physical button on each device.